R.O. PANEL

We are engaged in offering RO plant panel that are designed to operate the plant in auto mode and as well as in manual mode. These are widely used in the domestic and industrial purposes for purifying water. Offered in various models with multiple specifications as required by the clients, the RO plant panels are widely appreciated for their efficient purification processes and microbiological portability.

AUTOMATION PHILOSPHY :

The Astero microprocessor based panels are ideally suited for small and medium sized RO plants as they have the complete Operating logic of the process pre-programmed. The panels basically can take 6 inputs from the 3 devices namely low pressure switch(LPS), High pressure switch(HPS), permeate tank level switch(LS).

OPERATING LOGIC :

Upon switching on of the panel, if the lavel of the permeate tank is low, the raw water pump will start and the reject selenoid valve will open for a programmed time(flush the membrane). After the flush time is over, the processor will check for low pressure input.

OPERATION OF THE PANEL :

Starting Sequence: After switching ON power supply of the panel, it checks for following inputs.

• level of permeate tank is low the RWP (Raw Water Pump) will start AND reject solenoid valve will open for the programmed time period.

• After flush time over, the processor will check foe low pressure input. If input is ON (short), HPP (High Pressure Pump) will start after the set denouce time.